The EK1100 is the link between the protocol at fieldbus level and the . The coupler converts the passing telegrams from 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.

Special features:

• Connection technology: 2 x RJ45 socket
• Connection lengths: up to 100 m
• Number of EtherCAT Terminals in the overall system: up to 65,535

The EK1100 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further EtherCAT devices in the same segment. In addition, an EtherCAT junction or an EtherCAT extension can be used for the extension or for setting up a line or star topology.

The system and field supply, each 24 VDC, is provided directly at the coupler. The attached EtherCAT Terminals are supplied with the current required for communication from the supplied system voltage. The coupler can supply a maximum of 5V and 2A. If higher current is required, power feed terminals such as the EL9410 have to be integrated. The field supply is forwarded to the individual components via the power contacts with up to 10A.

In the EtherCAT network, the EK1100 can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The EK9000 and EK1000 couplers are suitable for use at the switch.

Task within EtherCAT system: coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks

Data transfer medium: Ethernet/EtherCAT cable (min. Cat. 5), shielded

Distance between stations: max. 100 m (100BASE-TX)

Number of EtherCAT Terminals: up to 65,534

Protocol: EtherCAT

Delay: approx. 1 µs

Data transfer rates: 100 Mbit/s

Bus interface: 2 x RJ45

Power supply: 24 V DC (-15 %/+20 %)

Current consumption from US: 70 mA + (? E-bus current/4)

Current consumption from UP: load

Current supply E-bus: 2000 mA

Power contacts: max. 24 V DC/max. 10 A

Electrical isolation: 500 V (power contact/supply voltage/Ethernet)

Operating/storage temperature: -25…+60 °C/-40…+85 °C

EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4

Relative humidity: 95 %, no condensation

Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27

Protect. class/installation pos: IP 20/variable

Approvals/markings: CE, UL, ATEX, GL, IECEx, cFMus

>>> Refer to technical document: ek1100